Facilan™ C8 Filament

Facilan™ C8 Filament 

Facilan™ C8 is an Additive Manufacturing Filament Designed for Manufacturing using 3D Printing. 

• Facilan™ C8 Fused Deposition Modelling filament has a higher tensile  strength than ABS
• Facilan™ C8 has higher impact strength than PLA.
• On most printers, Facilan™ C8 should 3D Print without visible layers. 
• Facilan™ C8  has the best layer adhesion properties of any 3D printing material.
• Facilan™ C8 has the best surface quality of any FDM material. 
• The material has a soft touch feel.
• Facilan™ C8  should be smooth with an even matte surface finish.
• Developed for high throughput manufacturing applications.
• Consumer-friendly parts for true Additive Manufacturing.
• Facilan™ C8's printing profile is available in the Ultimaker Cura Marketplace.
• This material has been designed to be used in manufacturing applications. With better interlayer bonding, smoother surfaces as well as higher strength, Facilan™ C8 is a true Additive Manufacturing material made for demanding end-use part applications.

Facilan™ C8 Material Properties

• Density 1.4 g/cm³
• Tensile Strength 45 MPa
• Elongation at yield 4%
• Tensile Modulus 3000 MPa 
• Flexural Strength  67 MPa 
• Flexural Modulus 3640 MPa
• Izod impact strength (notched) 7 kJ/m2 
• Shore D Hardness  72
• Heat Deflection Temperature 55°C

Print Settings 

• Bed Temperature: 35-50°C
• Adhesion: Magigoo Original on glass or a PEI Sheet 
• Print Temperature: 195 °C (180-210°C).
• Print Speed: 40 mm/s 

TDS

You can find the Technical Data Sheet for Facilan™ C8 here.

MSDS

The Material Safety Data Sheets for Facilan™ C8 are available for download in the following languages:

English 

Spanish

French

Italian

German

Dutch